Let’s start at the front of the trailer. Here you will find the reefer engine. In our video example, we show you a Thermo King C-600.
The control panel is where you manually control the reefer unit. It also stores and collects data and allows you to conduct an automated pre-trip inspection. On units with an alarm system, the control panel will display malfunction alerts. It feeds alert signals to the driver indicator light, which indicate in red or amber that there is a problem. The indicator light is visible in the driver’s rear-view mirror. Through the tracking system, alarm notifications are also emailed, so your team can take the right actions to save a load if a malfunction occurs.
From the control panel, you can select from two temperature control modes for your reefer trailer:
You’ll find the battery behind the white paneling surrounding your control panel. It will either be a wet cell or an ion battery, an option that we at Premier switched to in 2021.
You can find the main working components, such as the engine and compressor, in the panel to the left of the control panel.
The fuel tank holds around 50 gallons at a time. If your fuel falls to 7.5 gallons, it will trigger an alert. When you receive this alert, it should give you or your team around two hours to refill your tank.
Did you know? Not all reefers are used for cooling. Some reefers hold products at a relatively warm temperature instead. Pharmaceutical companies, for example, have products that need to be housed at 72 ℉.
Reefers generally come with either a swing or a roll door. Reefer swing doors are much thicker than a van’s swing doors because they’re insulated. This insulation is designed to maintain a consistent temperature in the trailer. You also have the option to choose a trailer with a roll door.
The floor of your reefer trailer rental may be what we call a duct floor or a flat floor. Duct floors are grooved, allowing air to flow through more evenly. Flat floors are generally designed to hold palletized material.
The airflow chute is on the ceiling of the trailer’s interior. The chute carries air from the engine and distributes it out of its sides and its back. This prevents hot spots and protects your load by spreading air out evenly. At the rear of the airflow chute is a mesh that serves as an anti-snag feature, protecting your chute from being ripped off when you’re loading your trailer.
Note: When the reefer is in use, the airflow chute will inflate. When it isn’t in use, it will deflate in order to stay out of the way!
The interior wall of a reefer is highly damage-resistant. It’s built to protect against loading damage. If the interior wall is damaged, moisture could leak into the foam, making the reefer less efficient.
The bulkhead, located on the far cab-end wall of the reefer, draws air into the reefer from the lower section of the trailer.
Below the bulkhead, there are black, rounded pallet stops. These pallet stops act as a protective buffer to protect the reefer unit from being damaged during loading.
Hopefully, this walkthrough showed you everything you need to know about the major components of reefer trailers. If you want to learn more about trailers or are looking for a great resource for your teams, download our Trailers 101 Guide or sign up to receive the next walkthrough video and other helpful tools and articles on semi-trailers right in your inbox!